Wiring and Device Connections
37
Instruction Manual - Enova DVX-325xHD/22xxHD All-in-One Presentation Switchers
FIG. 40 displays the pin locations for the HDMI INPUTS:
FIG. 40
HDMI pinouts
To connect HDMI input source devices (DVI and HDMI) to the HDMI INPUT connectors, the following (optional) adapter cables are
required:
The following table displays the supported video settings for each type of input connection compatible with the HDMI INPUT
connectors:
DXLink INPUTS
Two DXLink (RJ-45) connectors transport digital video, embedded audio, Ethernet, and bi-directional control over twisted pair cable
to DXLink devices or boards, including digitally transcoded analog video signals. Both inputs support HDCP 1.4. These connectors
are not available on all DVX models. Consult the Digital Audio Ports table on page 36 for a list of DVX models that feature DXLink
INPUTS connectors.
FIG. 41 displays the DXLINK INPUTS connectors.
FIG. 41
DXLINK INPUTS
See the
Important Twisted Pair Cabling Requirements and Recommendations
section on page 39 for information about cable
requirements for these ports.
DVI Input Adapter Cables
Name
Description
Length
FG#
HDMI Interface Cable HDMI Male to HDMI Male
6 1/2’ (2m)
FG10-2178-05
HDMI to DVI Cable
HDMI Male to DVI Male
(See the
page 55 for more information on HDMI-to-DVI cable
wiring.)
6’ (1.828m)
FG10-2179
Supported Video Settings
Type
Phase
Shift
Hue
Saturation
Contrast
Brightness
DVI
X
X
HDMI
X
X
