Using the NetLinx Module
89
Metreau Keypads Instruction Manual
Setup - Alarms
Press
Alarm
on the main Setup page to access the
Alarms
page (FIG. 99). Use the options in this page to set alarms for one or more
selected Zones. An "Alarm" can be programmed to play a specific source in any specified Zone.
Adding an Alarm
1.
Touch one of the location (Zone) buttons to select the Zone for which you want to set an alarm.
2.
Set the start time for the alarm using the H (hour) and M (minute) up/down arrows. Note that the alarm clock uses a 24-hour
clock time. Refer to the following table to quickly convert regular time to 24-hour clock time standards:
Regular and 24-hour clock time use the same number of minutes per hour and they use minutes in exactly the same way.
There is no need to convert minutes when going back and forth between the two time systems.
The alarm clock treats midnight as the start of a new day and express it as "0000".
FIG. 99
Setup - Alarms page
Regular Time
24-hour Clock
(hour value)
Regular Time
24-hour Clock
(hour value)
Midnight 00
Noon 12
1:00 a.m.
01
1:00 p.m.
13
2:00 a.m.
02
2:00 p.m.
14
3:00 a.m.
03
3:00 p.m.
15
4:00 a.m.
04
4:00 p.m.
16
5:00 a.m.
05
5:00 p.m.
17
6:00 a.m.
06
6:00 p.m.
18
7:00 a.m.
07
7:00 p.m.
19
8:00 a.m.
08
8:00 p.m.
20
9:00 a.m.
09
9:00 p.m.
21
10:00 a.m.
10
10:00 p.m.
22
11:00 a.m.
11
11:00 p.m.
23
