Metreau® Keypads
20
Metreau Keypads Instruction Manual
Pushbuttons 1-6
The top, bottom, left and right points on the Navigation Wheel are used for source control and can be programmed to provide any
source functionality by learning the applicable IR code.
The center pushbutton is dual-purpose: a push/release on this button provides one function, while a press/hold provides another.
The center pushbutton are also used for source control and can be programmed to provide any source functionality (again, by
learning the applicable IR code).
Navigation Wheel
FIG. 9 shows the button layout of the Navigation Wheel:
The Navigation Wheel can be rotated bi-directionally, and provides volume level control:
Clockwise rotation increases the volume level, counter-clockwise rotation decreases the volume level.
The range for volume is 0 - 70.
DAS-MET-NUM Metreau Numeric Audio Keypad
The DAS-MET-NUM Metreau numeric keypad (FIG. 10) connects to the Main DAS-MET-6SRC keypad via a 14-pin connector. Used in
conjunction with the DAS-MET-6SRC Metreau keypad, it provides direct numeric access, setting & recalling presets, and access to
advanced functionality such as grouping, Setting Favorites, Alarm, and Keypad lockout functionality (see the
section on page 66 for information).
The DAS-MET-NUM is a SWT keypad, suitable for use in Matrix Distributed Audio Systems.
FIG. 9
Navigation Wheel - button layout
FIG. 10
DAS-MET-NUM Metreau Numeric Audio keypad (White shown)
Rotate wheel clockwise
to adjust Volume Up
Rotate wheel
counter-clockwise to
adjust Volume Down
Top center pushbutton = Nav UP
Bottom center pushbutton = Nav DOWN
Right center
pushbutton =
Nav RIGHT
Left center
pushbutton =
Nav LEFT
Center pushbutton =
Nav Center
12 pre-printed pushbuttons
ENTER button
(with LED to
provide feedback)
