background image

pg. 7

 

 

EU COMPLIANCE INFORMATION:

 

 

Hereby, Harman Professional, Inc. declares that the equipment type MU-1000/1300/2300/3300

 

is in compliance with the 

following: European Union Low Voltage Directive 2014/35/EU; European Union EMC Directive 2014/30/EU; European 

Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU and as amended by 2015/863;  

 

The full text of the EU declaration of conformity is available at the following internet address: 

https://www.amx.com/en/support_downloads/download_types/certification

 

 

WEEE NOTICE: 

 

The WEEE Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), which entered into force as 

European law on 14/02/2014, resulted in a major change in the treatment of electrical equipment at end-of-life. 

 

The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling 

and other forms of recovery of such wastes so as to reduce disposal. The WEEE logo on the product or on its box 

indicating collection for electrical and electronic equipment consists of the crossed-out wheeled bin, as shown below. 

 

 

 

 

 

 

 

 

This product must not be disposed of or dumped with your other household waste. You are liable of dispose of all your 

electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous 

waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will 

allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment 

will ensure safety of human health and environment. For more information about electronica and electrical waste 

equipment disposal, recovery, and collection points, please contact your local city center, household waste disposal 

service, shop from where you purchased the equipment, or manufacturer of the equipment.  

 
Manufacturer Information: 

HARMAN Professional, Inc. 

Address: 8500 Balboa Blvd. Northridge, CA 91329 USA 

 

EU Regulatory Contact: 

Harman Professional Denmark ApS 

Olof Palmes Allé 44, 8200 Aarhus N, Denmark 

UK Regulatory Contact: 

Harman Professional Solutions 

2 Westside, London Road, Apsley, Hemel Hempstead, HP3 9TD, UK 

 

 

 

Summary of Contents for AMX MU Series





























Reviews: