background image

Settings Pages

47

Modero G4 Touch Panels - Configuration & Programming Manual

Connection Utility

The 

Connection Status

 page (FIG. 68) displays the current connection information, including the latest Master and panel IP address 

information.

Streaming Video

The 

Streaming Video

 page (FIG. 69) is used to preview video sources, such as those coming through an MXA-MP or MXA-MPL. For 

more information on these devices, please refer to the 

MXA-MP/MPL Operation Reference Guide

, available at 

www.amx.com

.     

FIG. 68  

Connection Utility page

Connection Utility Page

Status:

Click this button to enable the Connection Utility page.

Master IP:

The IP address for the network’s Master.

Panel IP:

The IP address used by the device.

Messages Sent:

Lists the number of queries sent to the Master.

Responses Received: Lists the number of responses received from the Master.
Responses Missed:

Lists the number of responses missed by the Master.

FIG. 69  

Streaming Video page

Streaming Video Page

Enter URL:

Select this to enter the URL for the video stream to be displayed. The default is the touch panel’s camera, if applicable.

Clear URL:

Select this to clear the current streaming video URL being displayed.

Summary of Contents for AMX MXT/D-2000XL-PAN




















































































































Reviews: