Programming
84
Modero G4 Touch Panels - Configuration & Programming Manual
Intercom Commands (Cont.)
^ICM-SPEAKERLEVEL
Sets the speaker level during an intercom call (0 to 100).
Syntax
:
SEND_COMMAND <DEV>, "^ICM-SPEAKERLEVEL,<value>"
Variable
:
Level = 0-100
Example
:
SEND_COMMAND TP1, "^ICM-SPEAKERLEVEL,55"
^ICM-TALK
Intercom modify command.
Syntax
:
"'^ICM-TALK'"
Example
:
SEND_COMMAND TP1,"'^ICM-TALK'"
^IIC
Intercom incoming call.
Syntax
:
“’^IIC’
Notifies the panel (specifically the AMX BT Handset accessory) that an intercom call is coming in. This is to
enable the accessory to ring.
^IOC
Intercom outgoing call.
Syntax
:
“’^IOC’
Notifies the panel that an intercom call is outgoing. This is to enable any headset accessories for the
appropriate operation.