Transitions and Gestures (X Series Panels Only)
107
Modero G4 Touch Panels - Configuration & Programming Manual
The Modero X Series introduces new multi-touch gestures as well:
8.
2 Finger Swipe up
9.
2 Finger Swipe down
10. 2 Finger Swipe right
11. 2 Finger Swipe left
Simplified gesture velocity values are:
1.
Fast
2.
Normal
3.
Slow
Precise gesture velocity:
1.
For slides and circles, this represents pixels per second.
2.
For double taps, this is the time in milliseconds from the first press to the second release.
Enabling or Disabling the Gesture Custom Event
By default, a gesture custom event is sent to the master each time that a gesture is recognized. A send command has been added to
allow disabling and re-enabling of this capability.
The value sent is not retained and gesture custom events will be enabled each time the panel restarts.
Gesture Custom Event Commands
^GCE
Sets whether or not the panel sends a custom event to the master whenever a gesture is detected.
Syntax:
"'^GCE-ON'" or "'^GCE-OFF'"
Note: This setting is not retained and the default is to always send the events. To enable sending the event, the value
after the dash can be "on", "ON", or “1”. Anything else will disable sending custom events.
