Settings Pages
31
Modero G4 Touch Panels - Configuration & Programming Manual
Breakout Box
To use the MXA-MP Multi Preview or MXA-MPL Multi Preview Live devices for video stream display, the Modero G4 touch panel to
which it is connected needs to be configured to receive its signals. If a Breakout Box is not connected to the panel’s network, all
fields but the Breakout Box button will be empty.
NOTE:
For more information on operation and configuration of an MXA-MP or MXA-MPL, please refer to the MXA-MP/MPL Operation
Reference Guide, available at www.amx.com.
To configure the touch panel:
1.
From the Breakout Box page, press the
Breakout Box
button to enable the panel to receive information from the device.
2.
If the device is connected, the remaining information on the
Breakout Box
page will self-populate as the touch panel receives
that information from the device.
NOTE:
If the device is not connected to the touch panel at this time, any attempts at enabling the device will fail, and the
Breakout
Box
page will be blank other than the Breakout Box button. If an MXA-MP or MPL is not connected to the touch panel, the Breakout
Box button MUST be disabled to prevent network conflicts.
FIG. 37
Breakout Box page
Breakout Box Page
Breakout Box:
Click this button to enable the touch panel to receive information from the device.
Version:
Displays the current firmware version on the Breakout Box.
Serial Number:
Displays the serial number of the Breakout Box.
MAC Address:
Displays the MAC address of the Breakout Box.
Input Information:
Displays the video format and resolution coming from the video input port.
Stream Information: This feature is currently disabled.
