Wiring and Device Connections
5
Vision
2
Instruction Manual
Wiring and Device Connections
V2-Master Server Rear Panel Connections
This section details the ports and connectors on the rear panel of the Vision
2
Master server.
The two flex drives at the rear of the V2-Master server are fitted with 146GB 15K SAS 2.5in Hot-Plug Drives configured as Raid1 for
the OS (Microsoft Windows Server 2008 Standard)
LAN (RJ-45) Port
FIG. 4 describes the blink activity for the LAN 10/100/1000 Base-T RJ-45 connector and cable.
NOTE:
Vision
2
uses typical Cat5/5e/6 cabling for RJ-45 connections.
The following table lists the pinouts, signals, and pairing associated with the LAN connector.
FIG. 2
Vision
2
Master Server Rear Panel
FIG. 3
LAN (RJ-45) Port
FIG. 4
LAN Connector / LEDs
LAN RJ-45 Pinouts and Signals
Pin
Signals
Connections
Pairing
Color
1
TX +
1 --------- 1
1 --------- 2
Orange-White
2
TX -
2 --------- 2
Orange
3
RX +
3 --------- 3
3 --------- 6
Green-White
4
no connection
4 --------- 4
Blue
5
no connection
5 --------- 5
4 --------- 5
Blue-White
6
RX -
6 --------- 6
Green
7
no connection
7 --------- 7
7 --------- 8
Brown-White
8
no connection
8 --------- 8
Brown
Output port
LAN ports
Power connector
ETHERNET
A
L
A
- Activity LED (yellow)
lights when receiving or
transmitting LAN
data packets
L
- Link LED (green) lights when
the LAN cables are connected
and terminated correctly.
