Harman BSS Soundweb London BLU-100, Installation Manual

IMPORTANT SAFETY INSTRUCTIONS

ELECTROMAGNETIC COMPATIBILITY 

This device complies with part 15 of the FCC Rules and the Product 

Specifications noted on the 

Declaration of Conformity

. Operation 

is subject to the following two conditions:
•  this device may not cause harmful interference, and 

•  this device must accept any interference received, including interfer-

ence that may cause undesired operation.  

Operation of this unit within significant electromagnetic fields should be 

avoided.
•  use only shielded interconnecting cables.

Warning:

 This equipment is compliant with Class A of EN 55032. In a 

residential environment this equipment may cause radio interference.

DECLARATION OF CONFORMITY

Manufacturer’s Name:  BSS Audio
Manufacturer’s Address:  10653 S. River Front Parkway, Suite 300
 

South Jordan, Utah 84095, USA 

declares that the product:

Product name: 

BLU 100

Note: Product name may be suffixed by the letters EU, M, MX or V.

Product option:  None

conforms to the following Product Specifications:

Safety: 

IEC 60065; 8th Ed. 2014

EMC:   

EN 55032, 2nd Ed: 2015

EN 55024: 2010

FCC Part 15

Supplementary Information:

The product herewith complies with the requirements of the:
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
WEEE Directive 2012/19/EU

With regard to Directive 2005/32/EC and EC Regulation 1275/2008 of 17 
December 2008, this product is designed, produced, and classified as Professional 
Audio Equipment and thus is exempt from this Directive.

C. Rex Reed
Director, Engineering
Signal Processing
10653 S. River Front Parkway, Suite 300
South Jordan, Utah 84095, USA 
Date: November 13, 2017

European Contact:

Harman International
Salisbury House
London Wall
EC2M 5QQ
+44 207 562 9450

or

Harman Professional Inc.
10653 S. River Front Parkway, Suite 300
South Jordan, Utah 84095, USA 
Ph: (801) 566-8800
Fax: (801) 568-7583

SAFETY INSTRUCTIONS

NOTICE FOR CUSTOMERS IF YOUR UNIT IS EQUIPPED WITH A POWER CORD.

WARNING: THIS APPLIANCE SHALL BE CONNECTED TO A MAINS SOCKET OUTLET WITH A PROTECTIVE 
EARTHING CONNECTION.

THE CORES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

GREEN AND YELLOW - EARTH        BLUE - NEUTRAL        BROWN - LIVE

AS COLOURS OF THE CORES IN THE MAINS LEAD OF THIS APPLIANCE MAY NOT CORRESPOND WITH THE 
COLOURED MARKINGS IDENTIFYING THE TERMINALS IN YOUR PLUG, PROCEED AS FOLLOWS:
•    THE CORE WHICH IS COLOURED GREEN AND YELLOW MUST BE CONNECTED TO THE TERMINAL IN 

THE PLUG MARKED WITH THE LETTER E, OR WITH THE EARTH SYMBOL, OR COLOURED GREEN, OR 
GREEN AND YELLOW.

•    THE CORE WHICH IS COLOURED BLUE MUST BE CONNECTED TO THE TERMINAL MARKED N OR 

COLOURED BLACK.

•  THE CORE WHICH IS COLOURED BROWN MUST BE CONNECTED TO THE TERMINAL MARKED L OR 

COLOURED RED.

 THIS EQUIPMENT MAY REQUIRE THE USE OF A DIFFERENT LINE CORD, ATTACHMENT PLUG, OR BOTH, 
DEPENDING ON THE AVAILABLE POWER SOURCE AT INSTALLATION.  IF THE ATTACHMENT PLUG NEEDS 
TO BE CHANGED, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WHO SHOULD REFER TO THE 
TABLE BELOW. THE GREEN/YELLOW WIRE SHALL BE CONNECTED DIRECTLY TO THE UNITS CHASSIS.

CONDUCTOR

WIRE COLOR

Normal

Alt

L

LIVE

BROWN

BLACK

N

NEUTRAL

BLUE

WHITE

E

EARTH GND

GREEN/YEL

GREEN

WARNING:

 IF THE GROUND IS DEFEATED, CERTAIN FAULT CONDITIONS IN THE UNIT OR IN THE 

SYSTEM TO WHICH IT IS CONNECTED CAN RESULT IN FULL LINE VOLTAGE BETWEEN CHASSIS AND 
EARTH GROUND. SEVERE INJURY OR DEATH CAN THEN RESULT IF THE CHASSIS AND EARTH GROUND 
ARE TOUCHED SIMULTANEOUSLY.

WARNING: 

•  APPARATET MÅ TILKOPLES JORDET STIKKONTAKT. 
•  APPARATEN SKALL ANSLUTAS TILL JORDAT UTTAG. 
•  LAITE ON LIITETTÄVÄ SUOJAKOSKETTIMILLA VARUSTETTUUN PISTORASIAAN. 
•  APPARATET SKAL TILSLUTTES JORDET STIKKONTAKT.