10
solid red and recording on the master will begin�
3� When finished recording to the master, press the master
FOOTSWITCH
once to set
the loop end point� The master device’s recorded phrase will begin playing back and the
armed slave device will now immediately begin recording, indicated by the slave’s
REC
LED
lighting solid red� Once recording has begun you can continue singing�
4� When finished recording to the slave, press the slave’s
FOOTSWITCH
once to set the
loop end point� The phrase will automatically begin playing back along with the master
loop and the
PLAY LED
will light solid green�
5� Press the
FOOTSWITCH
on the master device 2 times quickly to stop loop playback on
both devices�
Gain Staging daisy chained JamMan Vocal XTs
When daisy chaining multiple Vocal XTs for multi-track vocal looping, you will want to
optimize the gain stucture of each pedal in the siganl chain to achieve the best signal-to-
noise performance�
To gain stage daisy chained Vocal XTs:
1� Begin by setting the
MIC LEVEL
on all JamMan Vocal XT’s to the
minimum position�
2� Start singing into the JamMan
Vocal XT and set the
MIC LEVEL
to the optimal level on the device
that the microphone is directly
connected to – for optimal signal
to noise performance, set this
control so it lights green and
orange regularly during normal
performance and only lights red
rarely on the loudest vocal signals�
3� Repeat step 2 on the next device
in the chain (see diagram to the
right)�
JamSync
IN
OUT
MASTER
Set MIC LEVEL Second
SLAVE 1
Set MIC LEVEL First
TO MIXER
