background image

1

 Overview 

Introduction

The JamMan

®

 Vocal XT is an easy-to-use vocal looper that is capable of recording phrases of 

up to 10 minutes in length, and with unlimited overdubs, you can now be your own backup 

vocalist! Use it to create your own vocal harmonies or rhythmic counterpoints in real time� 

The JamMan Vocal XT  features a studio quality dbx

®

 mic preamp with phantom power, 

allowing it be used with both dynamic and professional condenser microphones� This 

circuitry ensures your vocal signal is consistent and clear during regular performance and 

when looping�

The Mic Level control doubles as a multi-color input signal and clip indicator, making it 

easy to set the input level for your microphone� The Loop Level control provides a way to 

balance loop level with the direct vocal signal� The balanced XLR output can be plugged in 

to the line-level or mic-level input of a mixer, providing utmost flexibility�

Using the built-in JamSync™ feature, multiple JamMan Vocal XTs (or any other JamSync 

compatible loopers) can be synchronized to provide multi-track looping capabilities! It is 

possible to cascade two or more JamMan Vocal XTs for multi-track vocal looping, or sync 

with your bandmates’ JamSync compatible JamMan devices for synchronized looping with 

other members in the band!

We hope you enjoy the endless fun and simplicity that the JamMan Vocal XT provides� 

Thanks for choosing DigiTech

®

� 

Features

•  XLR Input/Output
•  Studio-Quality dbx

®

 Mic Preamp w/+48V Phantom Power & Gain Control

•  10 Minutes of Loop Recording Time
•  Record Unlimited Overdubs w/Undo & Redo
•  JamSync™ Input/Output
•  Silent Clear

 Prevents Playback When Clearing Loops

•  Simple User Interface w/3 Status LEDs, Loop Level Control, & Footswitch
•  Included Power Supply

Summary of Contents for DigiTech JamMan Vocal XT
















Reviews: