![background image](http://html1.mh-extra.com/html/harman/digitech-jamman-vocal-xt/digitech-jamman-vocal-xt_owners-manual_4000277006.webp)
3
Connectors
1. +48V Switch
Engage this switch to enable 48V
phantom power for use with condenser
microphones� Phantom power is on
when the switch is in the ‘in’ position
and off when the switch is in the ‘out’
position�
2. MIC IN Jack
Connect your mic to this XLR jack� If a
condenser mic is being used, the +48V
switch should be enabled (in position)�
3. MIC OUT Jack
Connect this balanced XLR output to
the line or mic input of a mixer, or to
the MIC IN jack of another JamMan
Vocal XT device for multi-track vocal
looping�
4. JAMSYNC OUT Jack
Connect this jack to the JAMSYNC IN
jack on another JamSync compatible
device for master control over loop
playback and stop functions�
5. JAMSYNC IN Jack
Connect this jack to the JAMSYNC
OUT jack on another JamSync
compatible device to slave loop
playback and stop functions to a master
device�
6. Power Jack
Connect only the included power
supply to this jack� The JamMan Vocal
XT can only be powered by using the
external adapter�
1
6
2
1
3
4 5
2
3
4
1
6
2
1
3
4 5
2
3
4