6
Operation
The JamMan Vocal XT was designed to be very simple to use right out of the box� This
section of the manual describes how to perform looping functions�
Recording a Phrase
The JamMan Vocal XT records a single phrase and then plays it back as a continuous loop�
To record a phrase:
1� Press the
FOOTSWITCH
and begin singing to start recording� The
REC LED
will light
solid red and recording will begin�
2� When finished recording, press the
FOOTSWITCH
once to set the loop end point� The
phrase will automatically begin playing back in a repeating loop and the
PLAY LED
will
light solid green�
3� Press the
FOOTSWITCH
2 times quickly to stop loop playback�
Recording Overdubs
Once a phrase has been recorded, overdubs can be added on top of the phrase�
To record overdubs:
1� Press the
FOOTSWITCH
to start loop playback� The
PLAY LED
will light solid green and
the phrase will begin playing�
2� Press the
FOOTSWITCH
again to begin overdub recording� The
DUB LED
will light solid
yellow and audio will be recorded on top of the phrase�
3� When done overdub recording, press the
FOOTSWITCH
to end the overdub recording
session� The loop will continue playing along with the newly recorded overdub�
4� You can now decide whether you would like to undo the last overdub and re-record
it (see "Undoing/Redoing Overdubs" in the following section) or proceed and record
additional overdubs by repeating steps 2-3�
5� Press the
FOOTSWITCH
2 times quickly to stop loop playback�