4
3-90-233R24_11/13
Options
Inlet Cover part#
1-10-09542
Direct Vent Wall Passthrough
Item # 1-10-677177 provides for safe passing
of the 3” or 4” pellet vent pipe through an
outside wall, while providing the attachment
for outside air. No extra holes needed.
Standard method of attaching outside air. Be
sure to use the inlet cover to prevent birds and/
or rodents from entering the intake pipe. This
method requires a hole to the outside, separate
from the vent passage.
Outside Air Components
water Piping Supports-
Item # 2-00-232044B, secures to the boiler
and gives the support needed for the
expansion tank and circulator, while keeping
them at a workable distance from the boiler.
Atmospheric Conversion-
Item #1-00-232200, provides auto-
matic fill, and converts the heating
system plumbing from pressurized
to a zero pressure system. Allows
for installation into more places
where codes and standards restrict
pressurized systems.
bulk Storage hopper-
Item #1-00-73450, with 1500 lb pellet
capacity, it will automatically re-fill
the unit hopper when it falls below a
certain level.
