background image

12

10. RE-CONNECT JBL BAR 2.0 SUB 

(SOLD SEPARATELY)

After  you connect the JBL BAR 2.0 SUB subwoofer to power, 

it is automatically paired and connected with soundbar. In some 
special cases, you may need to pair them again.

POWER

POWER

3S

To re-enter the subwoofer pairing mode

1.  On the JBL BAR 2.0 SUB subwoofer, press and hold   until 

 flashes white. 

2.  On the soundbar, 

a)  Check that the wireless dongle of JBL BAR 2.0 SUB has 

been properly connected to the TYPE C connector and 

the soundbar is switched on;

b) 

To  enter  the  subwoofer  pairing  mode  on  the  soundbar, 

press and hold 

 on the remote control for more than 

three seconds, and then press - on the remote control.

Notes: 

 

The subwoofer will exit the pairing mode in three minutes if pairing 
and connection are not completed. 

 turns from flashing white to 

solid amber. 

11. PRODUCT SPECIFICATIONS

General specification: 

• 

Power supply: 100 - 240 V AC, ~ 50/60 Hz

• 

Total speaker power output (Max. @THD 1%): 80 W

• 

Soundbar output power (Max. @THD 1%): 2 x 40 W

• 

Soundbar transducer: 2 x racetrack drivers

• 

Soundbar standby power: < 0.5 W

• 

Operating temperature: 0°C - 45 °C 

Video specification:

• 

HDMI Video output (With Audio return channel): 1

Audio specification:

• 

Frequency response: 70 Hz - 20 KHz

• 

Audio inputs: 1 Optical, Bluetooth, USB (USB playback is 
available in US version. For other versions, USB is for Service 
only.), USB Type C (For wireless subwoofer dongle only.)

USB (Type A) specification (Audio playback is for US version 

only): 

• 

USB port: Type A

• 

USB rating: 5 V DC / 0.5 A

• 

Supporting file format: mp3, wav

• 

MP3 Codec: MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 

2.5 Layer 3

• 

MP3 sampling rate: 16 KHz - 48 KHz

• 

MP3 bitrate: 80 kbps - 320 kbps

• 

WAV sample rate: 16 KHz - 48 KHz

• 

WAV bitrate: Up to 3000 kbps

Wireless specification:

• 

Bluetooth version: 4.2

• 

Bluetooth profile: A2DP V1.3, AVRCP V1.5

• 

Bluetooth frequency range: 2402 MHz - 2480 MHz

• 

Bluetooth Max. transmitting power: <10 dbm (EIRP)

• 

Modulation type: GFSK, π/4 DQPSK, 8DPSK

Dimensions:

• 

Soundbar dimensions (W x H x D): 
614 x 58 x 90 mm / 24.17” x 2.28” x 3.54”

• 

Soundbar weight: 1.61 kg

• 

Packaging dimensions (W x H x D): 855 x 125 x 145 mm

• 

Packaging weight (Gross weight): 2.6 kg

Summary of Contents for JBL BAR 2.0 PLUS
















Reviews: