www.jbl.com
English
9
6. PLAY
6.1 Power-on/Auto standby/Auto wakeup
POWER
Switch on
1. Connect the soundbar to power by using the supplied power
cord.
2. Press
to switch on.
Notes:
–
Use the supplied power cord only.
–
Before switching on the soundbar, make sure that you have
completed all other connections (See “TV connection” in the
“Connect” chapter).
Auto standby
If the soundbar is inactive for more than 10 minutes, it will switch
to standby mode automatically. Next time you switch on the
soundbar, it returns to the last selected source.
Auto wakeup
In standby mode, the soundbar will wake up automatically when
•
the soundbar is connected to your TV through the HDMI
ARC connection and your TV is switched on;
•
the soundbar is connected to your TV through an optical
cable and audio signals are detected from the optical cable.
6.2 First-time setup of JBL BAR 2.0 SUB (sold
separately)
Connect the JBL BAR 2.0 SUB subwoofer
1. On the soundbar,
a) Connect to the
connector the wireless dongle of
JBL BAR 2.0 SUB.
TYPE C
b) Check that the soundbar is switched on.
2. Connect the JBL BAR 2.0 SUB subwoofer to power by using
the supplied power cord.
POWER
POWER
→
When lights up solid white, the subwoofer is connected.
: Connection status indicator
Solid white
Connected to the soundbar
Flashing white
Pairing mode
Solid amber
Standby mode
6.3 Play from the TV source
With the soundbar connected, you can enjoy TV audio from the
soundbar speakers.
HDMI ARC
OPTICAL
1.
Make sure that your TV is set to support external speakers
and the built-in TV speakers are disabled. Refer to the owner’s
manual of your TV for more information.
2. Make sure that the soundbar has been properly connected
to your TV (See “TV connection” in the “CONNECT” chapter).
3. To select the TV source, press
on the soundbar or
TV
on
the remote control.
→
The status indicator turns solid white.
•
In the factory settings, the TV source is selected by
default.
