Harman JBL BAR 700, Owner'S Manual

9

9

www.jbl.com

English

4.2  Wall-mounting

Wall-mount the soundbar and detachable rear speakers together 
or separately.

4.2.1 Wall-mount the soundbar

5

2

≤8

 mm/

0.31

"

4mm/
0.16

"

≥30 mm/1.18"

4

3

1c)

1

555.7 mm / 21.88”

1a)

1b)

> 50

mm/2’’

1.  Preparation:

a)  With the distance of about 2” (50mm) from your TV, stick 

the supplied wall-mounting template to a wall by using 
adhesive tapes.

b)  Use your ballpen tip to mark the screw holder location. 

Remove the template. 

c)  On the marked location, drill a 4 mm/0.16” hole. 

2.  Install the support for wall-mounting bracket.
3.  With the screw, fasten the wall-mounting bracket onto the 

bottom of the soundbar.

4.  Mount the soundbar.
5.  After the soundbar is securely wall-mounted, dock the two 

detachable speakers onto the soundbar. 

NOTES:

–

Make sure that the wall can support the weight of the soundbar.

–

Install on a vertical wall only.

–

Avoid a location under high temperature or humidity.

–

Before wall-mounting, make sure that cables can be properly 
connected between the soundbar and external devices.

–

Before wall-mounting, make sure that the soundbar is unplugged 
from power. Otherwise, it may cause an electric shock.

–

To move the soundbar, first remove the two detachable speakers to 

avoid accidental damage.

–

Use the supplied side caps to cover the two ends of the soundbar 
after you detach the rear surround speakers (See Step 5 under 
“

4.2.2 Wall-mount the detachable speakers as rear surround 

speakers

”).

4.2.2 Wall-mount the detachable speakers as rear 

surround speakers

5

1

3

2

4

3

≥30 mm/1.18"

≤8

 mm/

0.31

"

4mm/
0.16

"

1.  From the soundbar, remove the two detachable speakers.
2.  Install the wall-mounting bracket. 
3.  Fasten the support onto the back of the speakers.
4.  Mount the speakers. 
5.  Install the side caps.