Harman JBL Commercial VMA Series, Operation Manual

20

3.7 Media Player

3.7.1 Bluetooth Operation

To activate Bluetooth, perform the following: 
1.  Press the Bluetooth Key until the Bluetooth Indicator begins to flash. 
2.  Enable Bluetooth of your source media player and search for “JBL 

COMMERCIAL (XX)”. Establish a connection. (Note that the “XX” represents 

the last two digits of the MAC address which allows the user to have multiple 

systems in close proximity.)

3.  Once connected, the Bluetooth Indicator will stop flashing and remain 

illuminated. 

4.  Press the VOLUME UP/VOLUME DOWN keys to increase or decrease the 

volume. 

5.  Press the NEXT key to jump to the beginning of the next track. 
6.  Press the PREVIOUS key once to jump to the beginning of the current track or 

twice to the previous track. 

7.  Press the STOP key to stop playing. (

Note: This may not work for some 

Bluetooth devices

.) 

8.  Press the PLAY/PAUSE key to pause or resume playing. 
9.  To disconnect, either press the Bluetooth Key or disable Bluetooth at the media 

player source device. (

Note: Play will resume automatically upon reconnect if 

disconnected by pressing the Bluetooth Key

.) 

10.  Press the REC key to start recording. (

Note: Media player signals are not 

recorded

.) 

Note:

 Bluetooth signal is muted when broadcasting the chime tone.

3.7.2 USB Operation

1.  Insert a USB Drive to the USB Audio Input and the number of folders and files on 

the USB Drive will be displayed.

2.  Press PREVIOUS or NEXT Key to scroll the playable media.
3.  Press the VOLUME UP/VOLUME DOWN keys to increase or decrease the 

volume.

4.  Press the REPEAT Key to enter different repeat modes:

•  REPEAT CURRENT – Repeat the current track.
•  REPEAT ALL – Repeat all tracks.
•  REPEAT ALL 30Min Message – Play the track with the predefined name, 

“MESSAGE_1.mp3” every 30 minutes while repeating all other tracks.