13
CPi2000 Cinema Processor
User Guide
REAR PANEL
1
2
3
4
5
6
8
9
11
7
10
1. AC Power Input
The AC Power Input accepts mains power of 100-240 VAC, 50-60Hz, 20W. Please connect the AC power cable
provided by the manufacturer.
NOTE:
Ensure the power cable is disconnected from the power supply before installing the unit or doing
any service job.
NOTE:
Unplug the unit from the power supply during lightning storms or when unused for long periods of
time.
2. Mic Input
The Mic Input uses a XLR connector to accept balanced or unbalanced signal with adjustable gain of -
∞
dB - 40 dB.
+12V phantom power is available and can be switched on or off through the GUI software provided. This connector
normally connects to a RTA microphone for room EQ tuning.
By pressing the Mic Input button (4 @ front panel), input signal from the Mic Input will be used.
3. Music (Non-Sync) Input
The Music (Non-Sync) Input uses RCA L-R connectors to accept stereo signal from a CD or DVD player.
By pressing the Music (Non-Sync) Input button (6 @ front panel), input signal from the Music (Non-Sync) Input will
be used.
4. Digital Input
The Digital Input uses a female HD-25 connector and normally connects to a cinema server. This input supports up to
7.1-channel audio input and accommodates PCM audio at 96, 48, and 44.1 kHz and 32 kHz (16, 20 and 24 bits) and
Dolby Digital at all data rates and sample rates.
Summary of Contents for JBL CPi2000
