CONNECTING THE MICROPHONE TO DSLR
CAMERAS/CAMCORDERS/AUDIO RECORDERS
i. Plug the 3.5mm TRRS connector into the
microphone input on the camera/recorder. Insert
the LR44 battery into the battery module, with
polarity as indicated. Slide the switch on the
battery module to camera mode.
i. Use the given ¼” adapter to plug the microphone
into the microphone input of the mixer-amplifier.
Insert the LR44 battery in the battery module, with
polarity as indicated. Slide the switch on the
battery module to camera mode.
CONNECTING THE MICROPHONE TO
MIXER AMPLIFIERS
i.
This slide switch on the battery
module lets you reduce the
output of the microphone by
sliding to “-10dB” position.
This setting is particularly
useful while recording in noisy
conditions and helps reduce
ambient noise capture.
GAIN REDUCTION
