Harman JBL Professional BRX 300 Series User Manual Download

Page: 16 / 18

JBL BRX300 SERIES

SYSTEM SPECIFICATIONS

The BRX300 Series is a system that ships as different SKU’s to enable ease of transportation. The models are meant

to be used together. The specifications below are for the systems.

Frequency Range (-10 dB)

32 Hz–20 kHz

Frequency Response (-3 dB)

40 Hz–19 kHz

Max Rated SPL

SUB: 136 dB, TOP: 136 dB

System Components

SUB: 2 x 15”, TOP (each): 2 x 8” LF + 1 x 3” titanium compression driver

Nominal Coverage (H x V)

110° x 12° each element (vertical coverage is a function of inter-box angles)

System Input Connectors

AMP MODULE: 2 x balanced XLR-F wired in parallel to XLR-M for THRU outputs

TOP: 2 x 4-pole NL4 connectors wired in parallel for IN/THRU use

System Output Connectors

AMP MODULE: 2 x 4-pole NL4 connectors for powering up to 4 x TOPS

System Power Input

1 x 20A PowerCon, system input voltage is 230 VAC only

Dimensions (H x W x D)

TOP: 299 x 662 x 376 mm

SUB: 890 x 690 x 693 mm

Weight

TOP: 20.5 kg each

SUB: 86 kg

BRX308-LA SPECIFICATIONS

The BRX300 Series is a system that ships as different SKU’s to enable ease of transportation. The models are meant

to be used together. The specifications below are for shipping purpose only.

Frequency Range (-10 dB)

80 Hz–20 kHz

Frequency Response (-3 dB)

100 Hz–19 kHz

Max Rated SPL

136 dB

System Components

2 x 8” LF + 1 x 3” titanium compression driver

Nominal Coverage (H x V)

110° x 12° each element (vertical coverage is a function of inter-box angles)

System Input Connectors

2 x 4 pole NL4 connectors wired in parallel for IN/THRU use

Dimensions (H x W x D)

299 x 662 x 376 mm

Weight

20.5 kg each

BRX325SP SPECIFICATIONS

The BRX300 Series is a system that ships as different SKU’s to enable ease of transportation. The models are meant

to be used together. The specifications below are for shipping purpose only.

Frequency Range (-10 dB)

32 Hz–250 Hz

Frequency Response (-3 dB)

40 Hz–150 Hz

Max Rated SPL

136 dB (calculated based on sensitivity and power ratings)

System Components

2 x 15”

System Input Connectors

AMP MODULE: 2 x balanced XLR-F wired in parallel to XLR-M for THRU outputs

System Output Connectors

AMP MODULE: 2 x 4-pole NL4 connectors for powering up to 4 x TOPS

System Power Input

1 x 20A PowerCon, system input voltage is 230 VAC only

Dimensions (H x W x D)

890 x 690 x 693 mm

Weight

86 kg

SPECIFICATIONS

Summary of Contents for JBL Professional BRX 300 Series



















Search results

Summary of Contents for JBL Professional BRX 300 Series

Reviews:

Related manuals for JBL Professional BRX 300 Series

Brands by name

Popular brands

Harman JBL Professional BRX 300 Series, User Manual

Search results

Summary of Contents for JBL Professional BRX 300 Series

Reviews:

Related manuals for JBL Professional BRX 300 Series

Brands by name

Popular brands