Place the tweeter in the mounting location, then turn each setscrew clockwise to tighten mounting brackets. Use caution so
as not to overtighten. Snap the included outer ring over the mounting bracket to hide the setscrews.
Specifications
Stadium 6
Stadium 8
Stadium 10
Continuous power
handling
100W
200W
300W
Peak power handling
300W
500W
900W
Frequency response
40Hz – 25kHz
30Hz – 22kHz
20Hz – 2kHz
Nominal impedance
3 Ohms*
3 Ohms*
2 or 4 Ohms (use
switch to select)
Sensitivity
92dB
92dB
89dB
External diameter
7-15/32” (189.4mm)
9-1/2” (241mm)
11-5/8” (295.3mm)
Mounting cutout diameter
5-23/32” (144.8mm)
Woofer: 7” (177.4mm)
Tweeter bracket: 4-9/16”
(115.9mm)
9-9/16” (235.6mm)
Total depth
3-21/32” (92.5mm)
4-5/8” (117.2mm)
6-9/16” (167mm)
Mounting depth
2-9/16” (65mm)
3-3/16” (80.5mm)
4-7/8” (123mm)
*NOTE: Because of the woofer’s low impedance, do not wire two or more in parallel to an amplifier; doing so can result in
overheating and damage to the amplifier.
