Harman JBL Synthesis SSW-3, Owner'S Manual

8

PAINTING THE GRILLE

1

3

2

4

1.  Carefully remove scrim cloth from the rear of the grille. Clean grille on both sides with alcohol. You can cover the edge trim with 

masking tape if desired.

2.  When the alcohol has evaporated, place the grille on scrap cardboard in an open area away from sensitive surfaces. Paint the front 

of the grille in light amounts by multiple passes with the spray can or gun. Try to keep an even spray and avoid building up the 
thickness of the paint too fast. If any holes are blocked with paint, open them up with a pin or small wire. Use appropriate safety 
clothing and protection for this step!

3.  Once the paint is dry, turn the grille over, and reapply the scrim cloth to the back of the grille. If the scrim cloth was torn or damaged 

upon removal, you can use the enclosed spare cloth. If the cloth no longer wants to stick to the back, you can apply light amounts 
of a spray adhesive, such as 3M 77 to the back of the grille, and then attach the scrim cloth. Make sure that no spray adhesive makes 
foam or blocks holes.

4.  Attach the grille to the SSW-3 using instruction #11 on page 5.