background image

Introduction, Description and Features, Included Items 

3

SB 16

Introduction

Please register your product on our Web site at 
www.harmankardon.com.

Note: You’ll need the product’s serial number. 
At the same time, you can choose to be 
notified about our new products and/or special 
promotions.

Thank you for purchasing the harman kardon

®

 SB 16 speaker system, with which you’re 

about to begin many years of listening enjoyment. The SB 16 has been custom-designed 
to provide the excitement and power of the cinema experience in your own living room.

While sophisticated electronics and state-of-the-art speaker components are hard at 
work within the SB 16, hookup and operation are simple. 

To obtain maximum enjoyment from your new soundbar speaker system, we urge 
you to take a few minutes to read through this manual. This will help ensure that the 
connections you make are correct. In addition, a few minutes spent learning the functions 
of the various controls will enable you to take advantage of all the power and refinement 
the SB 16 is able to deliver.

If you have any questions about this product, its installation or its operation, please 
contact your retailer or custom installer, or visit our Web site at www.harmankardon.com.

Description and Features

The SB 16 is a complete home theater speaker system that includes:

s!VIDEOSHIELDEDSTEREOSOUNDBARSPEAKERTHE3"#42 WITHTWOWAYDUAL

driver left and right speakers and built-in 25-watt x 2 stereo amplifier

s!INCHMM WATTWIRELESSPOWEREDSUBWOOFERTHE3"35" 

s7ALLMOUNTBRACKETSFORTHESOUNDBAR

s!FOOTM STEREOAUDIOCABLEFORCONNECTINGTHESYSTEMDIRECTLYTOYOUR46S

audio output.

The SB 16CTR soundbar contains the system’s left and right speakers and stereo 
amplifiers, and features digital signal processing with virtual 3D surround circuitry that 
creates a complete surround-sound experience without any extra speakers or wires. You 
can set the soundbar on a table in front of your TV; also, the system includes hardware 
that makes it easy to mount the soundbar on the wall along with your flat-panel TV. You 
can program the soundbar to respond to your TV remote’s volume, power and source 
commands.

The SB 16 SUB subwoofer receives its signal from the SB 16CTR soundbar via wireless 
technology, so you can place it anywhere in your room without having to run any wires. 
Its 10-inch (250mm) woofer and built-in 100-watt amplifier deliver a movie’s impact and 
excitement. Other conveniences include a volume control, a phase switch for fine-tuning 
bass performance to suit your listening environment, and an efficient switching system 
that senses the presence of an audio signal and automatically switches the subwoofer on.

harman kardon invented the high-fidelity receiver more than 50 years ago. With state-
of-the-art features and time-honored circuit designs, the SB 16 system will turn your 
flat-screen TV into a fun and exciting home theater.

Included Items

One SB 16 CTR soundbar speaker

One SB 16 SUB 10-inch (250mm) 100-watt wireless subwoofer 

Two sets of wall-mount brackets for the soundbar – one shallow and one extended (for 
when the optical digital audio input is being used)

Two rubber feet 

 One 24V DC power supply and one AC power 
cord for the SB 16CTR speaker

One 1.5m (5-ft) optical digital audio cable

One 2m (6.5-ft) stereo audio cable

Important:

 If anything is missing, or if any part of your SB 16 system fails to operate 

properly, contact your dealer immediately.

 

 

 

Summary of Contents for Kardon SB 16















Reviews: