4
Specifications*
System
Frequency range: 44Hz – 20kHz
Power consumption: 4W idle,
65W maximum
Subwoofer
Transducer (1): 6" woofer
Amplifier output power: 20W RMS
Dimensions (W x H): 9-3/16" x 10-3/16"
(232mm x 258mm)
Weight: 4 lb (2.2kg)
Satellite
Transducers (4): 1" full-range per channel
Amplifier output power: 10W RMS
per channel
Dimensions (W x H): 2" x 10"
(51mm x 254mm)
Weight: 1.5 lb (0.7kg)
Troubleshooting
Symptom
Possible problem
Solution
No sound from SoundSticks speaker
system.
No power to subwoofer.
Power adapter plug not inserted
correctly.
No volume or low volume.
Ensure power supply is connected to live power source and is properly
connected to subwoofer. Please note: When subwoofer is powered, a
power LED should light.
Place plug with arrow symbol facing UP into the subwoofer.
Touch the volume “Up” (+) pad on the volume control satellite to
unmute and/or increase the system volume level.
Note: Touching the volume “Down” (–) pad lowers the system volume.
Touching both (+) and (–) volume control pads at the same time will mute
the system.
SOUNDSTICKS
®
WIRELESS
*These specifications are subject to change without notice.
R
L
Step 1. Place individual
SoundSticks (satellites)
beside monitor/computer.
Place subwoofer as desired,
but placement under desk
provides best performance.
Step 2. Connect satellite
cables to the dual
subwoofer cable. Also
connect the input cable
to the subwoofer input
cable jack.
Step 3. Insert
SoundSticks input cable
into the computer or
other audio device.
Step 4. Plug power cord
into power adapter.
