TEC0081 20150915 P/N: 630-00065 revA
SR601 • Pinnacle 101 Stair Lift Installation
3
Pinnacle 101 Stair
PRELIMINARY CHECKS
Tools Required
The following is a suggested list of basic tools to
have on hand during installation.
Cordless drill
Allen wrenches (5/64”, 5/32”, 3/16”, 5/16”)
Phillips screwdriver (#3)
Nut driver (3/8” and 5/16”)
6-10” driver extension
T30 Torx bit (included)
Level
Hack saw or chop saw
SAE socket set
SAE wrenches
Tape measure
Volt Meter
Included Parts
Before beginning installation, please inspect and
check the box contents. Report any damage to your
dealer.
Chassis Box:
Chassis
In Tray
2 Wireless call/send hand controls
Power supply
Manual overide tool
Installation manual
Owner’s manual
Rail Box:
Bottom rail pre-installed with:
Bottom end plate
Charge strip wire harness
Bottom limit cam
Joint pins and joint brackets
(two-piece rail only)
Plastic gear rack
Top rail pre-installed with:
Charge strip wire harness
Rail accessories (plastic bag):
Top end plate
Compression bolts (2 sizes)
Self-cutting screws (1/4”-20 X 1”)
Torx T30 driver bit
Rail Bracket Box:
Rail brackets (2, 3, 4, or 6 per set)
Wood screws (#14 X 2” (4 per rail bracket)
Chair and Footrest Box:
Chair with seat belt
Footrest complete with:
Adjustable seat height frame
Plastic vertical cover
Nylon plugs (5)
Seat swivel post with fasteners
Rail parts (plastic bag):
Extra plastic racks (2 or 3)
Top limit cam
