background image

pg. 7

SERVICE AND MAINTENANCE

If the AQUAJOY BATHLIFT is not used for 6 months the battery will require charging before the 
lift is used.  Please follow the charging instructions on page 8 of this manual. The AQUAJOY 
BATHLIFT will not require any additional maintenance or servicing, other than periodic cleaning.

Cleaning

To Clean the

 

AQUAJOY BATHLIFT , scrub with a household detergent and then wipe dry with 

a cloth.  The AQUAJOY BATHLIFT should be stored in a dry place. The AQUAJOY BATHLIFT 
can be used with or without covers.  The cover mats can be easily removed and washed in your 
washing machine up to a maximum temperature of 140°F  (60°C).

Environmental Conditions for Use, Storage and Transport

Use:   

a) An ambient temperature range of 50 F° to 104F° (+10 C° to +40C°).

 

 

b) A relative humidity range of 30% to 75%.

 

 

c) An atmospheric Pressure range of 700hPa to 1060hPa 

Storage and Transport:
 

 

a) An ambient temperature range of -31F° to 122F° (-35 C° to 50C°).

 

 

b) A relative humidity range of 10% to 100%.

 

 

c) An atmospheric Pressure range of 300hPa to 1060hPa 

EMI / RFI Warnings

The bath lift may be adversely affected by Electromagnetic Interference  (EMI) and Radio 
Frequency Interference (RFI).  Do not operate the following items within 10 feet of the bath 
lift; Cellular phones, mobile two-way radios, HAM radio transmitters, wireless computer links, 
microwave sources, paging transmitters.

Summary of Contents for aquajoy premier plus bathlift


















Reviews: