10
Section 4 - Operating the AL200 Lift continued
Enclosed Vehicle Applications
Unloading Your Scooter or Power Chair —Enclosed Vehicle Applications
•
Undo any preparations made to secure the scooter or power chair for transport.
•
Raise the scooter or chair by pressing the UP button on the Hand Control until the tires are high enough to clear
the highest obstacle, usually the door sill or tailgate.
Caution: Stop lifting before the Strap Hook contacts the Strap Roller mounted on the Lifting Arm. Contact
will result in damage to the lift. A properly adjusted and operated lift will avoid this.
•
Swing the scooter or chair out of the vehicle, carefully ensuring that the scooter does not contact the vehicle.
•
With the scooter or chair positioned away from the vehicle, lower the lift using the DOWN button. Continue lower-
ing the lift slightly beyond the scooter or chair touching the ground to allow removal of the Strap Hook from the
docking device on the scooter.
Caution: Do not allow the scooter or chair to come in contact with the vehicle. Damage may result to both
the vehicle AND the operator.
Replace anything removed from the scooter or chair for loading purposes. Swing the Lifting Arm back into the vehicle
and place the Hand Control on the Velcro mounting pad. Close the doors or tailgate and you are ready to go.
PLEASE PROCEED TO SECTION #7 FOR SAFETY AND MAINTENANCE INFORMATION.
