18
© 2014 Harmar Mobility, LLC • All Rights Reserved
Installation - AL600
SECTION 2 : INSTALLER
With Folding 3rd Row Seating
1. Fold 3rd Row seating up,
exposing the storage
well.
[Figure 18-1]
NOTE:
A BA-02 Kit is needed for this installation.
More detailed instructions on BA-02 installation
will be provided with the BA-02 Kit.
Figure 18-1
2. Measure the height of the well.
[Figure 18-2]
X
Figure 18-2
3. Position brackets as shown.
Slide up
or down until you achieve the measured
well height. (Holes are arranged for ¼”
increments)
[Figure 18-3]
X
4.
Attach brackets together
and fasten using
supplied hardware.
[Figure 18-4]
BHCS
1/4-20 x 3/4"
1/4-20
Nylock Nut
5. Position assembled parts around third row
seat(s)
then fold into well.
[Figure 18-5]
folded
seat
storage
well
6. Install set screws (leave loose) as shown.
Slide
foot plate assembly onto legs.
[Figure 18-6]
7. Attach rails to brackets.
[Figure 18-7]
Figure 18-4
Figure 18-5
Figure 18-6
Figure 18-7
1/4-20 Acorn Nuts
1/4" Split Lock Washers
Figure 18-3
