22
© 2014 Harmar Mobility, LLC • All Rights Reserved
SECTION 2 : INSTALLER
Installation - AL690
42"
52"
Inner
Door
Surface
3/8 Flat Washer
Mounting Bracket
3/8 - 16
J-HOOK
3/8 - 16
Nyloc Nut
Hex Head Bolt,
1/2-13 x 4.00"L
Fully Threaded
Mounting
Bracket
1.
Remove 2nd Row Seating.
[Figure 22-1]
2. Installing the Front Leg.
The AL690’s front leg
must be mounted between 42” and 52” from the
internal surface of the closed side door of the vehicle.
Examine loor area for remaining seat attachment
points that are recessed into the loor.
[Figure 22-2]
3. Front Leg Attachment
3A. If Seat Attachment Points ARE Available:
See
Figure 22-3
for mounting diagram.
Figure 22-1
Figure 22-2
Figure 22-3
IMPORTANT:
Attachment Points MUST be FLUSH or LOWER than
the loor.
