10
| www.harmar.com | 800-833-0478
Part Number: 630-00008- Rev A
Installation
Figure 10-7
Figure 10-8
Figure 10-9
Figure 10-4
Figure 10-5
Figure 10-6
Figure 10-1
Figure 10-2
Figure 10-3
mid station landing
the unit will stop on this when driven with the wireless
remote. It will stop for 5 to 6 seconds then continue. It
will not stop with the joystick.
charging Station alignment
When assembly is complete, align both charging
Stations. Pay attention to the charging contacts where
the drive unit meets the Station. they should be
applying pressure to the charging pins.
[Figure 10-4, Figure 10-5 & Figure 10-6]
Adjustment is on the chassis
drive the unit to the other charging Station and check
the alignment. Adjust as needed.
18. Final Limit
•
Install final limit bracket
[Figure 10-7]
•
Install hard final limit on gear rack
[Figure 10-8]
•
Pipe end caps and support caps need to be installed
Final limit hard stop
[Figure 10-8 & Figure 10-9]
+
−
