STEP 20:
Remove both the front and the rear ‘bumpers’ from the Pinnacle chassis.
Switch them for the ones in the parts box. They both are attached with Phillips
screws.
STEP 21:
Test ride the unit a couple of times to verify that the folding rail is
operating properly.
STEP 22:
This completes this procedure. We recommend you use a household cleaner and paper towels to clean it
before turning it over to the end user.
VI. FOLDING RAIL CONVERSION
A. WHERE YOU SHOULD WORK
Ensure that you have a sufficient amount of space. This process can be done on a workbench or on the floor.
Choose a work surface that isn’t going to damage the finish, such as carpet or a large piece of cardboard.
B. TOOLS REQUIRED
Wrenches (1/2” deep socket, 9/16” open end and 13 mm wrench or socket
Allen wrenches (3/16”, 1/4”, and 5/16”)
Pencil
Phillips screwdriver, size #2 (the “medium” size_
Optional supplies:
White lithium grease
Spray cleaner
Paper Towels
20 Pinnacle Stair Lift manual | | www.Harmar.com | 866-351-2776
folding rail installation/folding rail Conversion
NOte!
The new Harmar folding rail for Pinnacle is designed so that all of the parts are
ous’ and can be switched from one side to another in about 15 minutes by a
skilled technician. Also, these pictures show the changes to the Pinnacle being made to
a chassis that are not installed on a rail. There’s no reason that these changes cannot
be made on a Pinnacle that is already mounted on a rail, but you may have to remove
more items than are shown her
ou encounter any problems or questions, call
Harmar Technical Support toll fr
ing business hours M-F.
