Pinnacle Stair Lift manual | | www.Harmar.com | 866-351-2776
3
table of Contents
table of Contents
I. PRELIMINARY CHECKS
TOOLS REQUIRED
The following is a suggested list of basic tools to have on hand during installation.
Cordless
drill
Allen wrench (5/64”, 5/32”, 3/16”, 5/16”)
Phillips
screwdriver
(#3)
Nut driver (3/8” and 5/16”)
6-10” driver extension
T30 Torx bit (included)
Level
Hack saw or chop saw
SAE socket set
SAE wrenches
Tape measure
INCLUDED PARTS
Before beginning installation, please inspect and check the box contents. Report any damage to your dealer.
Chassis
Box:
Rail
Box:
•
Chassis
•
Bottom rail pre-installed with:
•
Call/send parts
• Bottom end plate
• 2 Call/send hand controls
• Charge strip wire harness
•
Battery charger
• Bottom limit cam
•
Installation Manual
• Joint pins and joint brackets
•
Owner’s Manual
(two-piece rail only)
• Plastic gear rack
• Top rail pre-installed with:
• Charge strip wire harness
Rail Bracket Box:
• Rail accessories (plastic bag):
•
Rail brackets (2, 3, 4, or 6 per set)
• Top end plate
•
Wood screws (#14 X 2” (4 per rail bracket)
• Compression bolts (3 sizes)
• Self-cutting screws (1/4”-20 X 1”)
Chair and Footrest Box:
• Torx T30 driver bit
• Chair with seat belt
• Footrest complete with:
• Rail parts (plastic bag):
• Adjustable seat height frame
• Extra plastic racks (2 or 3)
• Plastic vertical cover
• Top limit cam
• Nylon plugs (5)
• Seat swivel post with fasteners
Preliminary Checks
