manualshive.com logo in svg

Harmonic Drive HFUS-2A Series, Engineering Data

The Harmonic Drive HFUS-2A Series, engineered with precision and efficiency, offers unparalleled performance. Access detailed engineering data and user manuals for free download on our website. Unlock the full potential of this cutting-edge product with comprehensive instructions exclusively available at 88.208.23.73:8080.

Share
Download
background image

2

1019658 11/2014

Contents

1. General 

 ................................................................................................................................................. 03

1.1 

Description of Safety Alert Symbols ...................................................................................................................................04

1.2 

Disclaimer and Copyright .....................................................................................................................................................04

2. 

Safety and Installation Instructions ................................................................................................... 05

2.1  

Hazards ................................................................................................................................................................................. 05

2.2 

Intended Purpose .................................................................................................................................................................06

2.3 

Non Intended Purpose ..........................................................................................................................................................06

2.4 

Declaration of Conformity .................................................................................................................................................... 07

3. 

Technical Description ........................................................................................................................... 08

3.1 

Product Description ..............................................................................................................................................................08 

3.2 

Ordering Code .......................................................................................................................................................................09

3.3 

Technical Data ........................................................................................................................................................................10

 

3.3.1   General Technical Data ...............................................................................................................................................10

 

3.3.2 Dimensions ..................................................................................................................................................................11

 

3.3.3  Minimum Housing Clearance.....................................................................................................................................15

 

3.3.4   Accuracy ......................................................................................................................................................................15

 

3.3.5   Torsional Stiffness .....................................................................................................................................................15

 

4. 

Actuator Selection Procedure .............................................................................................................. 16

4.1  

Selecting Harmonic Drive® Gears ..........................................................................................................................................18

 

4.1.1    Torque Based Dimensioning ......................................................................................................................................19

 

4.1.2   Life of the Wave Generator Bearing.......................................................................................................................... 21

 

4.1.3   Stiffness Based Dimensioning ................................................................................................................................. 22

4.2 

Calculation of the Torsion Angle .......................................................................................................................................... 24

4.3 

Accuracy of the Oldham Coupling ........................................................................................................................................ 24

4.4 

Efficiency Versus Load ......................................................................................................................................................... 25

 

4.4.1   Efficiency  Calculations .............................................................................................................................................. 25

 

4.4.2  Efficiency Tables........................................................................................................................................................ 26 

4.5 

No Load Starting-, Back Driving- and Running Torque ...................................................................................................... 29

 

4.5.1   No Load Running Torque .......................................................................................................................................... 29

 

4.5.2  No Load Starting Torque ........................................................................................................................................... 30

 

4.5.3  No Load Back Driving Torque .................................................................................................................................... 30

4.6 Lubrication .............................................................................................................................................................................31
 

4.6.1  Grease Lubrication ..................................................................................................................................................... 31

 

4.6.2  Oil Lubrication ........................................................................................................................................................... 33

4.7 

Axial Forces at the Wave Generator .................................................................................................................................... 34 

5. 

Installation and Operation ...................................................................................................................35

5.1 

Transportation and Storage ................................................................................................................................................. 35

5.2 

Gear Conditions at Delivery .................................................................................................................................................. 35

5.3 

Assembly Instructions .......................................................................................................................................................... 36

5.4 

Recommended Tolerances for Assembly ............................................................................................................................40

5.5 

Wave Generator Components ...............................................................................................................................................41

5.6 

Bore Diameter for Solid Wave Generators ...........................................................................................................................41

5.7 Lubrication ............................................................................................................................................................................ 42
 

5.7.1    Grease  Lubrication .................................................................................................................................................... 42  

 

5.7.2   Grease  Reservoir .......................................................................................................................................................44

 

5.7.3   Grease  Change ...........................................................................................................................................................44

 

5.7.4   Gears with Oil Lubrication ........................................................................................................................................ 45

 

5.7.5   Lubrication  Holes ......................................................................................................................................................46

5.8 

Preparation for Assembly ....................................................................................................................................................46

Summary of Contents for HFUS-2A Series



























































Reviews:

No comments

Related manuals for HFUS-2A Series

zipwake E Series Operator'S Quick Manual preview
E Series
Brand: zipwake Pages: 2
zipwake E Series Start-Up Checklist preview
E Series
Brand: zipwake Pages: 2
Eagle Eye Power Solutions BC-2500 Installation Instruction preview
BC-2500
Brand: Eagle Eye Power Solutions Pages: 2
Omnia 11 Quick Start Installation Manual preview
11
Brand: Omnia Pages: 8
BARKO LOADERS 295 Service Manual preview
295
Brand: BARKO LOADERS Pages: 85
Eaton X10 Installation Manual preview
X10
Brand: Eaton Pages: 21
Eaton XV-152 Series Operating Instructions Manual preview
XV-152 Series
Brand: Eaton Pages: 70
NANO Pulsar Operating Instructions preview
Pulsar
Brand: NANO Pages: 4
M-Audio FireWire 1814 Quick Start Manual preview
FireWire 1814
Brand: M-Audio Pages: 3
Tanco 1300 Series Operator'S Handbook Manual preview
1300 Series
Brand: Tanco Pages: 112
BARRON Exitronix LEMD Series Installation Instructions Manual preview
Exitronix LEMD Series
Brand: BARRON Pages: 6
C-LITE C-HB-A-LB2-SCCT Series Installation Instructions Manual preview
C-HB-A-LB2-SCCT Series
Brand: C-LITE Pages: 9
Launch X-431 Torque HD Manual preview
X-431 Torque HD
Brand: Launch Pages: 3
Fast MT765 Challenger Installation-Parts preview
MT765 Challenger
Brand: Fast Pages: 31
Gomaco GT-3600 Owner'S/Operator'S Manual preview
GT-3600
Brand: Gomaco Pages: 30
Panduit BT2HTI Operation Instructions preview
BT2HTI
Brand: Panduit Pages: 4
York Fitness experience Owner'S Manual preview
experience
Brand: York Fitness Pages: 18
4B RG1V56A Operation Manual preview
RG1V56A
Brand: 4B Pages: 16

Brands by name

Popular brands

Load more brands