manualshive.com logo in svg

Harmonic Drive HFUS-2A Series, Engineering Data

The Harmonic Drive HFUS-2A Series, engineered with precision and efficiency, offers unparalleled performance. Access detailed engineering data and user manuals for free download on our website. Unlock the full potential of this cutting-edge product with comprehensive instructions exclusively available at 88.208.23.73:8080.

Share
Download
background image

3

1019658 11/2014

5.9 Assembly ............................................................................................................................................................................... 47
 

5.9.1   Assembly of the Circular Spline ...............................................................................................................................48

 

5.9.2  Assembly of the Flexspline ......................................................................................................................................48

 

5.9.3  Flexspline Screws ...................................................................................................................................................... 49  

 

5.9.4  Assembly of the Wave Generator to the Input Shaft ............................................................................................. 50

 

5.9.5  Check before Assembly of the Wave Generator ...................................................................................................... 50

 

5.9.6  Final Check of Position of the Wave Generator ....................................................................................................... 50

 

5.9.7  Assembly Control ...................................................................................................................................................... 50

6. Glossary ................................................................................................................................................. 51

6.1 

Technical Data ........................................................................................................................................................................51

6.2 

Labelling, Guidelines and Regulations .................................................................................................................................57 

1. General

About this documentation

This document contains safety instructions, technical data and operation rules for products of Harmonic Drive AG. 
The documentation is aimed at planners, project engineers, commissioning engineers and machine manufacturers, offering 
support during selection and calculation of the servo actuators, servo motors and accessories.

Rules for storage

Please keep this document for the entire life of the product, up to its disposal. Please hand over the documentation when 
re-selling the product.

Additional documentation

For the configuration of drive systems using the products of Harmonic Drive AG, you may require additional documents.  
Documentation is provided for all products offered by Harmonic Drive AG and can be found in pdf format on the website.

www.harmonicdrive.de

Third-party systems

Documentation for parts supplied by third party suppliers, associated with Harmonic Drive® components, is not included in 
our standard documentation and should be requested directly from the manufacturers.

Before commissioning products from Harmonic Drive AG with servo drives, we advise you to obtain the relevant documents 
for each device.

Your feedback

Your experiences are important to us. Please send suggestions and comments about the products and documentation to:

Harmonic Drive AG
Marketing and Communications
Hoenbergstraße 14
65555 Limburg / Lahn
Germany
E-Mail: info@harmonicdrive.de

Summary of Contents for HFUS-2A Series



























































Reviews:

No comments

Related manuals for HFUS-2A Series

DARKSTAR TECHNOLOGIES D340 Manual To Operation preview
D340
Brand: DARKSTAR TECHNOLOGIES Pages: 4
TDW D2000 Maintenance Manuallines preview
D2000
Brand: TDW Pages: 2
Taurus 1170 Assembly And Operating Instructions Manual preview
1170
Brand: Taurus Pages: 25
Vancare G Series Quick Reference Manual preview
G Series
Brand: Vancare Pages: 3
Paitec ES-2000 User Manual preview
ES-2000
Brand: Paitec Pages: 14
ZOLL R Series In-Service Manual preview
R Series
Brand: ZOLL Pages: 5
Accu-Chek Compact Pocket User Manual preview
Compact
Brand: Accu-Chek Pages: 3
iBin Compact Installation Instructions preview
Compact
Brand: iBin Pages: 2
Oakworks Medical PG Series Instruction & Maintenance Manual preview
PG Series
Brand: Oakworks Medical Pages: 28
Malekko QUAD ENVELOPE Quick Start Manual preview
QUAD ENVELOPE
Brand: Malekko Pages: 2
Major MJ2000 Operator'S Manual preview
MJ2000
Brand: Major Pages: 26
Saadat Dena User Manual preview
Dena
Brand: Saadat Pages: 61
Saadat Dena 350 Service Manual preview
Dena 350
Brand: Saadat Pages: 22
L-Acoustics LA4X Technical Bulletin preview
LA4X
Brand: L-Acoustics Pages: 5
Yamaha MCX-C15 - MusicCAST Network Audio Player Quick Manual preview
MCX-C15 - MusicCAST Network Audio Player
Brand: Yamaha Pages: 114
EditorsKeys Portable Vocal Booth Pro Studio Series Instruction Sheet preview
Portable Vocal Booth Pro Studio Series
Brand: EditorsKeys Pages: 2
Lightolier Calculite C6P38MHA Specification preview
Calculite C6P38MHA
Brand: Lightolier Pages: 2
TECshow MAGIC CUBE User Manual preview
MAGIC CUBE
Brand: TECshow Pages: 22

Brands by name

Popular brands

Load more brands