Chapter 10 Unit Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved.
283
Ellipse 3000 Release 3.0, Rev. B
SNMP Traps Sub-Menu
10.4.1
Traps Destination List
The
Traps Destination List
sub-menu displays a list of the existing trap-host entries. Each entry in
the list leads to the Trap configuration menu.
Adding an entry to the table is done differently from the Ellipse front panel and from the Web
manager. For details, see:
■
10.4.2 Add Entry Menu (front panel)
for the Ellipse front panel interface operation
■
10.4.4 Adding and Dropping Entries (Web Manager)
for the Web Manager Interface operation
Selecting an entry from the
Traps Destination List
displays the Trap configuration menu. This
menu allows setting the trap definitions, such as name, IP address, UDP port, and community.
Front Panel
To access the
Traps Destinations List
sub-menu on the front panel:
❖
Navigate
Root > Configuration > Unit > SNMP Traps > Traps Destinations List
.
To access the
Trap
configuration sub-menu on the front panel:
❖
Navigate
Root > Configuration > Unit > SNMP Traps > Traps Destinations List > [Trap
Name]
.
Web Manager
To access the
Traps Destination List
parameters in the Web Manager:
❖
Select
Unit > SNMP Traps
.
Traps Destinations List
1 New Host (10.2.2.1)
2 Remote_Control (192.168.002.001)
Trap
Name
Remote_Control
IP Address
192.168.002.001
UDP Port
00162
Community
public
