22
Component Replacement Guide
Replacing the Drive Cage
7. Start the file system. To start the file system:
a. From the
Configuration
tab in SystemManager, click the
Disk
Utilities
icon in the left-hand column to display the
Disk
Utilities
page.
b. Click the icon for the Omneon MediaDeck which contains the
file system you want to start. The
Disk Utilities
page for that
MediaDeck appears.
c. Click the
Filesystem
hyperlink to display the
Filesystem
Utilities
page (see
).
d. At the bottom of the page, click the
Start FS
button.
IMPORTANT:
Do not click ‘Initialize FS’. This will wipe out the entire
file system.
e. When the
Start Filesystem
page appears, make sure that the
first option,
Use NVRAM Journaling for this filesystem
, is
checked, and that all other options are unchecked. Click the
Start
button.
f. On the
Filesystem utilities
page, the
Mode
field should now
indicate
Read/Write
, the
Sharing with other
MediaDirectors
field should indicate
Off
, and the
Mountpoint
field should indicate
/fs0
.
g. From the
Configuration
tab, click the
Disk Utilities
icon and
verify that the file system status for this MediaDeck is shown as
Started
.
Summary of Contents for Omneon MediaDeck
