❶
20
1. Slide the vehicle’s shoulder belt into the RED clip
ensuring it is flat. Position the belt guide just above
the child’s shoulder ❶.
!
THE VEHICLE’S SHOULDER BELT MUST LIE ACROSS
THE CHILD’S SHOULDER.
!
All straps MUST be tight and NOT twisted. ALL slack
MUST be removed from lap-and-shoulder portions
of the vehicle belt to ensure a snug fit. THE LAP BELT
PORTION MUST PASS UNDER BOTH ARMRESTS AND
BE POSITIONED LOW ON THE HIPS.
USING SHOULDER BELT GUIDE
Shoulder
Belt
Belt
Guide
ENTANGLEMENT WITH VEHICLE SEAT BELT
! WARNING
: To avoid possible entanglement and
choking with your vehicle’s shoulder belts, Harmony
Juvenile Products recommends that the following
precautions are taken when installing your booster seat:
1. Pull the shoulder portion of the vehicle seat belt all
the way out until the retractor locks.
2. SLOWLY let the seat belt retract until it is snug against
your child.
3. ENSURE that the seat belts do not press on the
child’s flesh or push the child’s body into an unnatural
position.
4. Do the same for all unused vehicle seat belts.
