9
This booster seat conforms to the
Canadian Motor
Vehicle Safety Standards 213.2,
the
Federal Motor
Vehicle Safety Standards 213.2
,
and is certified for use
in the following classes of vehicles only: multi-purpose
passenger vehicles, passenger cars, and trucks. Harmony
Juvenile Products has also validated compliance through
independent laboratory testing.
This booster seat must
NOT
be used in homes, boats,
buses, motorcycles, motor homes, or any other vehicles
that have non-forward-facing seats, missing seat belts,
or whose seat belts do not meet the requirements of
this booster seat.
This restraint is
NOT CERTIFIED
for aircraft use.
This booster seat is
NOT
compatible with vehicle child
restraint
U
niversal
A
nchorage
S
ystems (
UAS
).
CERTIFICATIONS
NORTH AMERICA
!
Use
ONLY
the vehicle’s 3-point lap-and-shoulder belt
system when restraining a child in this booster seat.
DO NOT
use this booster seat with 2-point vehicle
belts (lap-belt only or shoulder-belt only). Your child
would be seriously injured in the event of a crash.
!
DO NOT
use this booster seat with unsafe vehicle
seat belts listed in section “Unsafe vehicle seat belt
systems” of this manual.
!
DO NOT
use this booster seat if it can’t be properly
installed. In very few vehicles, the booster seat cannot
be properly installed because of the type of seat, seat
belt system and/or airbag system. Read and follow these
instructions, and your vehicle owner’s manual carefully.
VEHICLE WARNINGS
