INSTALLING CUP HOLDER
(WHEN APPLICABLE)
1. The cup holder can be installed on
either side of the booster seat.
2. Locate the opening in the end of
either armrest.
3. Insert cup holder clip into the
opening and push in until locked
into place. Ensure that the fabric
does not interfere with the
installation. If so, gently pull down on the fabric while
installing cup holder.
4. Pull out to remove.
AIRCRAFT INSTALLATION
This booster seat is
NOT CERTIFIED
for aircraft use.
Aircraft seats are not equipped with 3-point lap-and-
shoulder belts which are required for use with this
booster seat.
INSTRUCTION MANUAL STORAGE
Store your instruction manual in
the storage section provided in the
booster seat’s backrest.
25
