background image

Long press Call key for 3 seconds to power OFF the device, you will hear "Power OFF"; If 
only to leave for a short time, there is no need to manually turn OFF, the device will 
automatically power OFF after 5 minutes in standby; it will automatically power ON and 
pair with the mobile phone when detecting the vibration of opening and closing of the car 
door.  
Please note that with the factory default setting the device is in pairing status when first 
powered ON. 
 

Bluetooth Pairing 

Long press Call key for 5 seconds in power OFF status or long press Mute key for 2 
seconds in power ON status to turn the device into pairing status, the RED and BLUE LED 
indicators flash alternately.   
Search for "CarBlu” in the Bluetooth device list at your mobile phone and connect it, the 
blue light will flash twice if successfully paired. If you need to pair with a second mobile 
phone, turn off the Car Kit first and repeat the above-mentioned steps. When the device is 
paired successfully it will turn into standby status with the BLUE LED indicator flashes. 
Please note that the Car Kit will not actively connect the first mobile phone after connect 
with the second one, you need to restart the Car Kit or press the Call Key if you want to 
pair with the first mobile phone. 
The Car Kit supports NFC fast connection, for mobile phones with NFC feature, simple put 
the mobile phone close to the Car Kit for appox. 3 seconds to automatically detect the 
device and connect it with one click. 
 

Volume control 

Long press the + / - key to increase or reduce the volume. Warm tips: It is advised to 
adjust the volume to a proper level, excessively large volume might be harmful to hearing. 
 

Answer and Reject Calls 

When there is an incoming call, the BLUE LED indicator constant light, you can speak 
“yes” or “no” to answer or reject the call. Also you can short press the Call Key to answer 
the call or long press the Call Key for 2 seconds to reject the call; in talking status short 
press Call Key again to hang up the call. 
 

Redial the Last Call 

Double press the Call Key to automatically dial the last call number. 
 

Mute Function 

In the midst of a conversation press Mute Key to mute the microphone, and press the 
Mute key again to go on talking. 
 

Music Last/Next 

In music play mode, short press "+/-" to switch music play Prev/Next and short press Mute 
key to play or pause the music (depend on mobile phone music player support). 

 

Summary of Contents for UM-B102-BS








Reviews: