InstallatIon and operatIon Manual for WInd and sun screen sl400
09/12
|
3
1. InTroduCTIon
the SL400 is a wind and sun screen. the screen consists of a box with roll-up system, a
fabric, a pull rod and a supporting system mounted at drop distance from the box. at the
top, the fabric can be either straight or oblique with a maximum angle of 15° and depending
on the length of the drop reinforced with boning. this drop can vary from a minimum of 1
metre up to a maximum of 4 metres.
this manual starts with a step-by-step description of the installation instructions of the
SL400 for installers. this is followed by information concerning the use and maintenance
of the screen for the end user. the last pages consist of the handover forms which the
installer can use to handover the SL400 to the end user.
2. General warnInGs
a number of precautions must be taken for the safe installation, operation and maintenance
of the sl400. Please take note of the following warnings for the safety of everyone
concerned!
!
please read these instructions carefully before starting with the installation.
!
the screen must be fitted or mounted in accordance with local requirements and
standards. all work must be carried out by a trained and experienced member of
staff from recognized companies, and never by “do-it-yourself” fitters or apprentices.
!
always proceed with caution. ensure that you have a robust footing.
!
Make sure there is adequate lighting in the assembly space. remove obstacles and
dirt. ensure that no other persons except the installers are present. unauthorized
persons can get in the way or be at risk during the installation.
!
there is a lot of tension on the fabric of the wind and sun screen, due to the
integrated coiled spring located in the fabric roll. always take the necessary care
when assembling or dismantling the screen.
!
the screen must be kept clearly in view at all times during installation and operation.
persons in the vicinity may be at risk of injury.
!
our products must be installed in such a way that all parts remain accessible at
all times for maintenance and repairs. If this is not the case, Harol cannot be held
responsible for any additional costs (e.g. demolition work, repairs to exterior or
interior walls) which may result from this.
the SL400 has been designed for use as a wind and sun screen and as such
must not be used for all-weather protection. during heavy rain or wind the
screen must be retracted immediately.
