10/20
|
4
INSTALLATION MANUAL MULTIFUNCTIONAL SURFACE MOUNTED ROLLER SHUTTER VR150
3.
GUARANTEE, TERMS AND CONDITIONS
•
Harol has endeavoured to design and manufacture this shutter in compliance with
the current CE standards. Always check that our version complies with your own
national standards institute.
•
No rights can be derived from these instructions whatsoever. Technical modifications
are reserved without written notification.
•
For large projects we strongly advise you to first fit one complete shutter before
fitting the remaining shutters. This will help detect any potential faults early on and
enable them to be remedied at the lowest possible cost.
•
For our general terms and conditions of sale, please refer to the price list.
•
Make sure the shutter box can always be opened so the mechanical parts inside can
be reached easily. If this rule is not respected, Harol cannot be held responsible for
the cost of demolition work, among other things.
Harol NV
Industriepark 3 – 3290 Diest
Belgium
+32 13 38 01 11
+32 13 31 48 03
info@harol.be
www.harol.com
4. REQUIREMENTS
•
Ladders
•
Drill with metal and masonry drills
•
Screwdrivers and open-ended spanners
•
Fastening bolts most suitable for the relevant base
•
Tape measure, pencil, and level
•
Voltmeter or 230 V testing lamp, testing cable with switch
•
Metal saw
•
Sizeable piece of cardboard or heavy plastic foil
•
Silicone mastic
•
Cutter
