- 6 -
V6-04-05
Assembly instructions Veranda sunblind VZ520
D11. Positioning the cables into the guide rails:
Take a guide rail, and insert the cable across the entry pulley. Hold the rail pointing diagonally down-
wards and push the cable through the rail. Make sure that the cable comes out again through the right
hole. At the far end, feed the cable back round the pulley.
D12. Positioning the guides:
Now lay the guide rails onto the glass roof, just in front of the pins of the mounting brackets.
D13. Positioning the cables into the endprofile:
Insert the cable into the endprofile, aside via the small hole behind the pulley on the slider block.
