Debris Blower
R
R
To begin operation:
1.
Mount Debris Blower to 3-point of trac-
tor and connect PTO shaft to tractor
output shaft.
2.
Adjust center link on tractor so that the
Debris Blower is setting level at the
ground surface while 3-point hitch is in
FLOAT position.
3.
Move Diverter Handle to the desired
output direction.
4.
Engage PTO lever on the tractor AT
IDLE SPEED of the tractor and begin
operation of the Debris Blower.
5.
If the operator needs to change direc-
tion of airflow of the diverter, make
sure the tractor is at idle speed.
6.
If it is necessary to inspect or work on
the Debris Blower, always disengage
the PTO shaft and shut off the tractor
engine before doing so.
SAFETY WARNING!
•
Belts may become severely dam-
aged by engaging PTO shaft at high
RPM.
•
To avoid personal injury, always
keep face and body parts away from
inlet and discharge openings.
•
Never leave this machine unattend-
ed.
•
Make sure the tractor engine has
been shut off and the PTO shaft has
been disconnected before attempt-
ing any service or inspection.
To stop operation:
1.
Move throttle on tractor to the slow
position and disengage the PTO lever
on the tractor.
2.
Shut off the tractor engine and allow
the machine to come to a complete
stop.
SAFETY WARNING!
•
The Impeller is heavy and will con-
tinue to turn even though the opera-
tor has shut off the power source.
•
Do not attempt to service or inspect
the machine until you see that the
shafts have stopped turning and
that there is no noise coming from
the machine.
9
Summary of Contents for Debris DB2700
