Turbo Vac TV60R
Crown AW46 or equivalent
Use only biodegradable oil;
Change filter element when needle is
in red portion of gauge.*
Clean as necessary.
Tighten or replace if necessary.
See Service & Maintenance Section.
Inflate to 30-32 psi.
20 gallons
TV60R-HD Service Schedule
Daily
Check hydraulic oil level………….......................................
Check hydraulic oil filter indicator……………………………
Check hydraulic oil cooler……………………………………
Visually inspect belts, bolts, fittings, and hoses …………..
Grease………………………………………………………….
Check tire pressure……………….…………………………..
Annually or 500 Hours
Change hydraulic oil………………………………………….
• The TV60R-HD is equipped with a Hydac, 10 micron, beta rated, hydraulic filter and is
designed for a long service life. When the hydraulic oil is warm and the indicator needle
is in the red portion of the gauge, the filter needs to be changed.
Standard Torque Chart
SAFETY WARNING!
Refer to the Standard Torque Chart when-
ever bolts, nuts or screws are tightened.
Size
In-Lbs Ft-Lbs N-m
No. 10-24
25-35 5-7 2.8-4.0
¼ in. 60-80 18-20 7-9
5/16 in. 120-140 28-30 14-16
3/8 in. 340-360 64-74 24-27
½ in.
126-150 90-100
Note
: When tightening two or more
fasteners on the same part, DO NOT
tighten the fasteners completely one at
a time. To avoid distortion, first tighten
all fasteners in sequence to one-third
of torque value, then tighten to two-
thirds of torque value, then tighten to
full value.
22
Summary of Contents for TURBO VAC 60R-HD
