R
R
Turbo Vac TV60R
TV60RH Hydraulic Oil Cooler
•
Make sure that the oil cooler assembly
is kept free of debris. Clean as neces-
sary.
Remote Control
•
If the remote control transmitter or
receiver should ever be replaced, the
dip switches must be set so that the
two components match.
Blower Liner
•
Regularly inspect the blower liner in
the blower housing for wear.
•
If the blower liner wears excessively,
damage may result to the blower
housing.
•
The blower liner is a wear item and is
not covered under warranty.
•
Sandy conditions will shorten the life of
the blower liner.
To check the blower liner:
•
Raise hopper and set the safety lock
as shown in the General Safety Guide
lines.
•
Check the blower liner located around
the inside of the blower housing.
•
If the blower liner is damaged or worn
through, replace it before damage is
done to the blower housing.
SAFETY WARNING!
Before attempting to inspect the liner,
make sure the power unit is turned off, the
unit has come to a complete stop, and the
spark plug wire has been removed.
When working under the hopper the
cylinder safety lock should be engaged to
prevent the hopper from falling.
20
RECEIVER
TRANSMITTER
Summary of Contents for TURBO VAC 60R
