20 GB
8. Levelling the stove 2
• Use the 2 M8 socket-head bolts provided at the back of the wall
support to level the stove “depthwise” (socket-head wrench 4).
• Tap the cotters into place.
7. Levelling the stove 1
• Use the 2 M10 socket-head bolts provided on the underside of the wall
bracket to level the stove “widthwise” (socket-head wrench 5).
9. Fitting wall-support finishing cover
• Fit the finishing cover by sliding the projections into the slots.
• If the cover is not fixed properly, use the 2 M8 bolts from the
transport brace to fix the cover.
10. Placing the casing
• Take the casing out of the packaging material.
• Open the door of the stove.
• Carefully put the casing over the stove sliding it, without damaging the
paint, until touching the stop.
