Harrie Leenders Fuga eL Instructions for Installation, Use and Maintenance
14
How to use the Fuga eL
1. Fully open the aircontrol slide by moving it towards the front of the
stove. This is the kindling position.
3. When the stove has been burning properly for a while, add a few
more solid logs. (First open the aeration slide.)
Stack lightly. The amount (not more than 3 logs) depends on the heat
required.
4. A quietly burning fire is obtained by closing the air slide even more
by pushing it inwards. This will reduce the draught in the Fuga eL. For
a glowing mass of charcoal, you may close the air slide even further.
The heat will then last longer. When you want to let the fire die down,
you must open the air slide more.
2. Place 3 fairly thick logs on the bottom of the stove. Stack some kin
dling wood on top of them. Stack lightly.
Light the kindling wood up in the stove with a firelighter or some paper.
Allow some time for the stove to heat up in order to ensure a proper
draught and a good fire under the more solid logs to be added.
